Semirremolque plataforma fliegl teleskopierbar nuevo
Ref: WFDFLT33901014072
Semirremolque plataforma Fliegl teleskopierbar nuevo
- 07819 Triptis
- Fliegl
Semirremolques Plataforma
|
Información principal
|
|
|---|---|
| Ref. cliente : | WFDFLT33901014072 |
| Ref. web : | 11509079 |
| Carrocería | Plataforma |
| Marca | Fliegl |
| Modelo | teleskopierbar |
| Estado | Nuevo |
| Año | - |
| Fecha 1ª matriculación | |
| País | ALEMANIA |
| Constructor | Fliegl |
Caja de cambios y transmisión |
|
|---|---|
| Precisiones caja de cambios | Boîte automatique |
Equipamiento Semirremolque Fliegl |
|
|---|---|
|
Neumáticos |
|
|---|---|
| Estado y dimensiones de los neumáticos | 100 % |
Suspensión / Ejes |
|
|---|---|
| Distancia entre ejes | 1.31 metros |
| |
Comentarios |
|---|
|
Localisation :
• Allemagne Triptis Carrosserie : • longueur - 13,5 m, largeur - 2,53 m Freins : • système abs Informations supplémentaires : • métallisé Description: Open semitrailer Functionality: fully functional Location: Oberpöllnitzer Straße 8, 07819 Triptis, Deutschland Farbe: silver Achsenkonfiguration: 3 axles Chassis semi-trailer transport company Fine-grained steel welded lightweight construction kingpin plate with replaceable 2" kingpin main frame reinforcement for 25 tons with center of gravity at 3 m loading length in the retracted state 13 pairs of hooks for lashing straps welded onto the cross members 23 pairs of lashing eyes recessed in the outer frame each rated at 3.5 tons 24-ton 2-speed support winch in reinforced design for loading and unloading single-sided operation 1 spare wheel holder for 1 spare wheel 1 storage compartment for stowage open with the option of stowing items behind the front wall or in a compartment between the extended longitudinal beams! 4 pairs of stake pockets recessed in the outer frame for rectangular tubes 80x80 mm 5 stake pockets recessed in the middle of the floor for rectangular tubes 80x80 mm with reinforcing beam installed between the outer stake pockets except for one 6 lashing/stake rails recessed across the floor over the entire width to the outer frame (max. usable internal width between the outer stake sockets approx. 2170 mm) approx. 100 mm high. With 20 mm round steel rails top and bottom spacing from top to bottom approx. 60 mm (of the round steel). Bottom with an angle plate as a closure half open downwards. For lashing and inserting stakes 80 x 80 mm Pull-out ladder at the rear on the right side 5 x 3 pairs of stake pockets recessed on the outside of the longitudinal beams for rectangular tubes 80x80 mm including reinforcing beams 10 "lightweight" stake sockets B=80/ T=80/ usable height approx. 1850 mm hot-dip galvanized with lashing eyes welded on at the bottom on both sides 2 plastic toolboxes b=600 / h=425 / t=460 mm lockable Telescoping extendable by a maximum of 4,000 mm and lockable approximately every 500 mm Main frame telescoping Locking with pneumatic bolt locking + display of frame locking on both sides operated via hand knob operation for brake/locking and suspension on the left side in front of the axles Nws Awr Esza Dyyehxjk Storage compartment between the longitudinal beams in the extended state Axles + Suspension SAF disc brake axles with 430 mm disc diameter Last axle with trailing arm with automatic reversing lock via reversing light and additional locking function on the vehicle via hand knob Axle spacing offset 1310/1410 mm also electrically operated from the truck with start-up assistance Braking system 2-line compressed air braking system Spring brake parking brake 2 non-interchangeable coupling heads at the front EBS Wabco electronic braking system with EBS socket at the front With raising & lowering valve + auto-reset function Axle load recognition via EBS-CAN bus signal for display on the display in the driver''s cab truck must be appropriately pre-equipped Wheels and tires 385/65 R 22.5" steel rims Electrical system 24 Volt multi-chamber lights yellow LED lighting on the side 2 white position lights at the front in LED 2 white/red side marker lights at the rear in LED 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at the front 1 rotating beacon with bracket switched via side light 2 pairs of warning signs LED illuminated and extendable to 3,500 mm Flashing side marker lights Side 7-pin sockets positioning 2x front panel 2x support legs 2x rear end 1 additional 7-pin socket in the underrun protection at the rear 2 additional LED work lights top inside on the fron |
|
Ver todo
|
Comentarios |
|---|
|
Localisation : • Allemagne Triptis Carrosserie : • longueur - 13,5 m, largeur - 2,53 m Freins : • système abs Informations supplémentaires : • métallisé Description: Open semitrailer Functionality: fully functional Location: Oberpöllnitzer Straße 8, 07819 Triptis, Deutschland Farbe: silver Achsenkonfiguration: 3 axles Chassis semi-trailer transport company Fine-grained steel welded lightweight construction kingpin plate with replaceable 2" kingpin main frame reinforcement for 25 tons with center of gravity at 3 m loading length in the retracted state 13 pairs of hooks for lashing straps welded onto the cross members 23 pairs of lashing eyes recessed in the outer frame each rated at 3.5 tons 24-ton 2-speed support winch in reinforced design for loading and unloading single-sided operation 1 spare wheel holder for 1 spare wheel 1 storage compartment for stowage open with the option of stowing items behind the front wall or in a compartment between the extended longitudinal beams! 4 pairs of stake pockets recessed in the outer frame for rectangular tubes 80x80 mm 5 stake pockets recessed in the middle of the floor for rectangular tubes 80x80 mm with reinforcing beam installed between the outer stake pockets except for one 6 lashing/stake rails recessed across the floor over the entire width to the outer frame (max. usable internal width between the outer stake sockets approx. 2170 mm) approx. 100 mm high. With 20 mm round steel rails top and bottom spacing from top to bottom approx. 60 mm (of the round steel). Bottom with an angle plate as a closure half open downwards. For lashing and inserting stakes 80 x 80 mm Pull-out ladder at the rear on the right side 5 x 3 pairs of stake pockets recessed on the outside of the longitudinal beams for rectangular tubes 80x80 mm including reinforcing beams 10 "lightweight" stake sockets B=80/ T=80/ usable height approx. 1850 mm hot-dip galvanized with lashing eyes welded on at the bottom on both sides 2 plastic toolboxes b=600 / h=425 / t=460 mm lockable Telescoping extendable by a maximum of 4,000 mm and lockable approximately every 500 mm Main frame telescoping Locking with pneumatic bolt locking + display of frame locking on both sides operated via hand knob operation for brake/locking and suspension on the left side in front of the axles Nws Awr Esza Dyyehxjk Storage compartment between the longitudinal beams in the extended state Axles + Suspension SAF disc brake axles with 430 mm disc diameter Last axle with trailing arm with automatic reversing lock via reversing light and additional locking function on the vehicle via hand knob Axle spacing offset 1310/1410 mm also electrically operated from the truck with start-up assistance Braking system 2-line compressed air braking system Spring brake parking brake 2 non-interchangeable coupling heads at the front EBS Wabco electronic braking system with EBS socket at the front With raising & lowering valve + auto-reset function Axle load recognition via EBS-CAN bus signal for display on the display in the driver''s cab truck must be appropriately pre-equipped Wheels and tires 385/65 R 22.5" steel rims Electrical system 24 Volt multi-chamber lights yellow LED lighting on the side 2 white position lights at the front in LED 2 white/red side marker lights at the rear in LED 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at the front 1 rotating beacon with bracket switched via side light 2 pairs of warning signs LED illuminated and extendable to 3,500 mm Flashing side marker lights Side 7-pin sockets positioning 2x front panel 2x support legs 2x rear end 1 additional 7-pin socket in the underrun protection at the rear 2 additional LED work lights top inside on the fron |
Tarifa de venta
Semirremolques Plataforma
|
Información principal
|
|
|---|---|
| Ref. cliente : | WFDFLT33901014072 |
| Ref. web : | 11509079 |
| Carrocería | Plataforma |
| Marca | Fliegl |
| Modelo | teleskopierbar |
| Estado | Nuevo |
| Año | - |
| Fecha 1ª matriculación | |
| País | ALEMANIA |
| Constructor | Fliegl |
Caja de cambios y transmisión |
|
|---|---|
| Precisiones caja de cambios | Boîte automatique |
Equipamiento Semirremolque Fliegl |
|
|---|---|
|
Neumáticos |
|
|---|---|
| Estado y dimensiones de los neumáticos | 100 % |
Suspensión / Ejes |
|
|---|---|
| Distancia entre ejes | 1.31 metros |
| |
Comentarios |
|---|
|
Localisation :
• Allemagne Triptis Carrosserie : • longueur - 13,5 m, largeur - 2,53 m Freins : • système abs Informations supplémentaires : • métallisé Description: Open semitrailer Functionality: fully functional Location: Oberpöllnitzer Straße 8, 07819 Triptis, Deutschland Farbe: silver Achsenkonfiguration: 3 axles Chassis semi-trailer transport company Fine-grained steel welded lightweight construction kingpin plate with replaceable 2" kingpin main frame reinforcement for 25 tons with center of gravity at 3 m loading length in the retracted state 13 pairs of hooks for lashing straps welded onto the cross members 23 pairs of lashing eyes recessed in the outer frame each rated at 3.5 tons 24-ton 2-speed support winch in reinforced design for loading and unloading single-sided operation 1 spare wheel holder for 1 spare wheel 1 storage compartment for stowage open with the option of stowing items behind the front wall or in a compartment between the extended longitudinal beams! 4 pairs of stake pockets recessed in the outer frame for rectangular tubes 80x80 mm 5 stake pockets recessed in the middle of the floor for rectangular tubes 80x80 mm with reinforcing beam installed between the outer stake pockets except for one 6 lashing/stake rails recessed across the floor over the entire width to the outer frame (max. usable internal width between the outer stake sockets approx. 2170 mm) approx. 100 mm high. With 20 mm round steel rails top and bottom spacing from top to bottom approx. 60 mm (of the round steel). Bottom with an angle plate as a closure half open downwards. For lashing and inserting stakes 80 x 80 mm Pull-out ladder at the rear on the right side 5 x 3 pairs of stake pockets recessed on the outside of the longitudinal beams for rectangular tubes 80x80 mm including reinforcing beams 10 "lightweight" stake sockets B=80/ T=80/ usable height approx. 1850 mm hot-dip galvanized with lashing eyes welded on at the bottom on both sides 2 plastic toolboxes b=600 / h=425 / t=460 mm lockable Telescoping extendable by a maximum of 4,000 mm and lockable approximately every 500 mm Main frame telescoping Locking with pneumatic bolt locking + display of frame locking on both sides operated via hand knob operation for brake/locking and suspension on the left side in front of the axles Nws Awr Esza Dyyehxjk Storage compartment between the longitudinal beams in the extended state Axles + Suspension SAF disc brake axles with 430 mm disc diameter Last axle with trailing arm with automatic reversing lock via reversing light and additional locking function on the vehicle via hand knob Axle spacing offset 1310/1410 mm also electrically operated from the truck with start-up assistance Braking system 2-line compressed air braking system Spring brake parking brake 2 non-interchangeable coupling heads at the front EBS Wabco electronic braking system with EBS socket at the front With raising & lowering valve + auto-reset function Axle load recognition via EBS-CAN bus signal for display on the display in the driver''s cab truck must be appropriately pre-equipped Wheels and tires 385/65 R 22.5" steel rims Electrical system 24 Volt multi-chamber lights yellow LED lighting on the side 2 white position lights at the front in LED 2 white/red side marker lights at the rear in LED 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at the front 1 rotating beacon with bracket switched via side light 2 pairs of warning signs LED illuminated and extendable to 3,500 mm Flashing side marker lights Side 7-pin sockets positioning 2x front panel 2x support legs 2x rear end 1 additional 7-pin socket in the underrun protection at the rear 2 additional LED work lights top inside on the fron |
|
Ver todo
|
Comentarios |
|---|
|
Localisation : • Allemagne Triptis Carrosserie : • longueur - 13,5 m, largeur - 2,53 m Freins : • système abs Informations supplémentaires : • métallisé Description: Open semitrailer Functionality: fully functional Location: Oberpöllnitzer Straße 8, 07819 Triptis, Deutschland Farbe: silver Achsenkonfiguration: 3 axles Chassis semi-trailer transport company Fine-grained steel welded lightweight construction kingpin plate with replaceable 2" kingpin main frame reinforcement for 25 tons with center of gravity at 3 m loading length in the retracted state 13 pairs of hooks for lashing straps welded onto the cross members 23 pairs of lashing eyes recessed in the outer frame each rated at 3.5 tons 24-ton 2-speed support winch in reinforced design for loading and unloading single-sided operation 1 spare wheel holder for 1 spare wheel 1 storage compartment for stowage open with the option of stowing items behind the front wall or in a compartment between the extended longitudinal beams! 4 pairs of stake pockets recessed in the outer frame for rectangular tubes 80x80 mm 5 stake pockets recessed in the middle of the floor for rectangular tubes 80x80 mm with reinforcing beam installed between the outer stake pockets except for one 6 lashing/stake rails recessed across the floor over the entire width to the outer frame (max. usable internal width between the outer stake sockets approx. 2170 mm) approx. 100 mm high. With 20 mm round steel rails top and bottom spacing from top to bottom approx. 60 mm (of the round steel). Bottom with an angle plate as a closure half open downwards. For lashing and inserting stakes 80 x 80 mm Pull-out ladder at the rear on the right side 5 x 3 pairs of stake pockets recessed on the outside of the longitudinal beams for rectangular tubes 80x80 mm including reinforcing beams 10 "lightweight" stake sockets B=80/ T=80/ usable height approx. 1850 mm hot-dip galvanized with lashing eyes welded on at the bottom on both sides 2 plastic toolboxes b=600 / h=425 / t=460 mm lockable Telescoping extendable by a maximum of 4,000 mm and lockable approximately every 500 mm Main frame telescoping Locking with pneumatic bolt locking + display of frame locking on both sides operated via hand knob operation for brake/locking and suspension on the left side in front of the axles Nws Awr Esza Dyyehxjk Storage compartment between the longitudinal beams in the extended state Axles + Suspension SAF disc brake axles with 430 mm disc diameter Last axle with trailing arm with automatic reversing lock via reversing light and additional locking function on the vehicle via hand knob Axle spacing offset 1310/1410 mm also electrically operated from the truck with start-up assistance Braking system 2-line compressed air braking system Spring brake parking brake 2 non-interchangeable coupling heads at the front EBS Wabco electronic braking system with EBS socket at the front With raising & lowering valve + auto-reset function Axle load recognition via EBS-CAN bus signal for display on the display in the driver''s cab truck must be appropriately pre-equipped Wheels and tires 385/65 R 22.5" steel rims Electrical system 24 Volt multi-chamber lights yellow LED lighting on the side 2 white position lights at the front in LED 2 white/red side marker lights at the rear in LED 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at the front 1 rotating beacon with bracket switched via side light 2 pairs of warning signs LED illuminated and extendable to 3,500 mm Flashing side marker lights Side 7-pin sockets positioning 2x front panel 2x support legs 2x rear end 1 additional 7-pin socket in the underrun protection at the rear 2 additional LED work lights top inside on the fron |
Tarifa de venta
Desde hace 2 años en Paraguay-Camiones.com
Vendedor
+49 (0)364 82 83 01 30
Contactar al vendedor
Vendedor
- Alemán
Sus datos
Registrarse /
Conectarse
Sus datos
Modificar
Teléfono
E-mail
Ubicación
Empresa
Ver todo
Ver menos
Contactar al vendedor Modificar
-
Teléfono
-
E-mail
-
Ubicación
-
Empresa
Ver todo
Ver menos
Consejos de seguridad
Anuncios similares
2
Semirremolque plataforma Fliegl nuevo Plateau
Fliegl Fahrzeugbau GmbH
Vendedor desde hace 2 años
12
ALQUILER
Semirremolque plataforma Kögel Multi Chassis, verstärkt
Es-Ge Nutzfahrzeuge GmbH
5
Semirremolque plataforma Möslein STO 3 Schwebheim 3 Achs Satteltieflader Plato 45 t GGfür Fertigteile, Baumaschinen oder Container
Leo Möslein GmbH
7
Semirremolque plataforma caja abierta 1.Achs Baustoff-Pritsche / TEREX 125.2 LK & ZWL
VTS Trucks GmbH
7
ALQUILER
Semirremolque plataforma Faymonville nuevo MAX Trailer 3-Achs-Doppeltele-Plateau zwangsgel.
HeavyTrailer AG
Las otras páginas web del grupo
Paraguay-Camiones.com :
Compraventa de camión de ocasión
Paraguay-Mop.com :
Compraventa de material OP de ocasión
Paraguay-Furgonetas.com :
Compraventa de furgoneta de ocasión
Paraguay-Manutencion.com :
Compraventa de material de manutención de ocasión
Paraguay-Agricola.com :
Compraventa de material agrícola de ocasión